Author Topic: XPUIPC for X-Plane 64 bit  (Read 33800 times)

Offline tim arnot

  • Administrator
  • Master Navigator
  • *****
  • Posts: 5919
  • Country: england
    • View Profile
Re: XPUIPC for X-Plane 64 bit
« Reply #15 on: June 12, 2017, 08:32:11 PM »
1. Start Plan-G
2. Click on the Data tab.
3. Click on the Build Navigation Database icon.
4. Click the Settings button.
5. Fill in the location of your x-plane.exe. Click OK
6. Select "Build X-Plane Database" (which should now be active)
7. Click OK.

Should take no more than 10 minutes on a slow PC.

Tim. @TimArnot

Offline Col1948

  • Pathfinder
  • *
  • Posts: 10
    • View Profile
Re: XPUIPC for X-Plane 64 bit
« Reply #16 on: June 13, 2017, 07:25:20 AM »
Sorry Tim but I've been doing that all along, anyway I just tried it again, the scrolling bar started so I went for breakfast, after around 45 mins still nothing, I'm on Windows 7 Ultimate 64bit, X-Plane 11, I also have FS9 and FSX and their data bases have built no problem.

Col.

Offline tim arnot

  • Administrator
  • Master Navigator
  • *****
  • Posts: 5919
  • Country: england
    • View Profile
Re: XPUIPC for X-Plane 64 bit
« Reply #17 on: June 17, 2017, 05:24:42 PM »
If it's still going after 10 minutes, it's failed. Stop and send me (attach to this thread) the log file.

Tim. @TimArnot

Offline Col1948

  • Pathfinder
  • *
  • Posts: 10
    • View Profile
Re: XPUIPC for X-Plane 64 bit
« Reply #18 on: June 18, 2017, 05:36:39 AM »
Hi Tim,

Log File as requested, this was after nearly an hour.

Regards

Col

Offline tim arnot

  • Administrator
  • Master Navigator
  • *****
  • Posts: 5919
  • Country: england
    • View Profile
Re: XPUIPC for X-Plane 64 bit
« Reply #19 on: June 18, 2017, 01:22:54 PM »
Either use the build attached to this post: http://www.tasoftware.co.uk/forum/index.php?topic=3578.msg17454#msg17454

or create the following folder on your PC D:\X-Plane 11\Resources\GNS430\airspaces

then it'll build the database.

Tim. @TimArnot

Offline Col1948

  • Pathfinder
  • *
  • Posts: 10
    • View Profile
Re: XPUIPC for X-Plane 64 bit
« Reply #20 on: June 18, 2017, 06:17:25 PM »
Hi Tim,
I presume the folder goes on my D drive is that correct, if not where does it go?

I thought I had it working at one point it started to build but got stuck on writing runways, it went in an endless loop.
So I started again, nothing happening yet.

Edited:

Bingo!  It worked, thank you, I misread your post, I created the folder inside the Resources folder, that's what you meant sorry, just the way I read it i did it wrong.
Any way it fired up now so I'm up and running with X-Plane 11.  :D
« Last Edit: June 18, 2017, 06:38:12 PM by Col1948 »