Author Topic: .Net Framework update  (Read 1540 times)

Offline ananda

  • Explorer
  • ***
  • Posts: 67
    • View Profile
.Net Framework update
« on: October 12, 2013, 06:21:14 PM »
Since Wednesday's Windows Update of .Net Framework 3.51 and 4 on Windows 7, neither Plan-G 2.05 or 3.0 runs. If I uninstall the updates both work fine.

A similar update to XP doesn't cause a problem.

Any ideas?

George

Offline tim arnot

  • Administrator
  • Master Navigator
  • *****
  • Posts: 5919
  • Country: england
    • View Profile
Re: .Net Framework update
« Reply #1 on: October 12, 2013, 07:32:53 PM »
I'll look at it when my PC updates tomorrow.

Tim. @TimArnot

Offline ananda

  • Explorer
  • ***
  • Posts: 67
    • View Profile
Re: .Net Framework update
« Reply #2 on: October 12, 2013, 07:43:13 PM »
Thanks Tim.

George

Offline w9nwrwi

  • Navigator
  • ****
  • Posts: 143
  • Country: us
    • View Profile
Re: .Net Framework update
« Reply #3 on: October 13, 2013, 12:12:29 PM »
Ran X-Plane, Windows 7, and Plan-G last night, no problems.  The last windows update I had was last Wednesday, the 9th. Checked the update history, it was a fairly big update of around 78Mb and included a few Net framework items.

Chuck
Computer:
CPU:i7-6700 4.0GHz, Ram:32GB,  Video.Card: GTX 1070 8Gb, OS:Win 10, 3ea 24" HDMI Widescreen.
X-Plane 11 RC1

Offline frankturley

  • Plan-G Team
  • Navigator
  • *****
  • Posts: 158
    • View Profile
Re: .Net Framework update
« Reply #4 on: October 14, 2013, 06:50:08 AM »
Mines also been ok since updates George.

Offline tim arnot

  • Administrator
  • Master Navigator
  • *****
  • Posts: 5919
  • Country: england
    • View Profile
Re: .Net Framework update
« Reply #5 on: October 14, 2013, 08:23:46 AM »
Two PCs, both updated, and neither had any problems. Not quite sure what to suggest.

Tim. @TimArnot

Offline ananda

  • Explorer
  • ***
  • Posts: 67
    • View Profile
Re: .Net Framework update
« Reply #6 on: October 14, 2013, 08:44:29 AM »
Thanks all.

I will leave out the updates.

George

Offline w9nwrwi

  • Navigator
  • ****
  • Posts: 143
  • Country: us
    • View Profile
Re: .Net Framework update
« Reply #7 on: October 14, 2013, 12:13:21 PM »
George,

You could still be correct. I flew last night and at the end of the flight I closed plan G, then I closed x-plane from the File, Exit, and got a windows had a problem error.  I am getting a XPUIPC NIC error during startup of X-plane. Coincidence since update????  ...I duuno...need to trouble shoot it today. Doubt its Plan G related.

**Update**
This morning I looked at my XPUIPC.INI file. The IPV4 server address had changed, I assume (knowing how to spell that word) the windows update did it. I changed it back to my correct IPV4 address, loaded up X-plane, ran the File, Exit and all went well. Then loaded up Plan G, then X-Plane, had them talk to each other, shut down Plan-G and the X-plane and all is well.
Did the simple trouble with the IPV4 server address cause me the Windows Error during shut down??? I have no idea, when it comes to these 1's & 0's I am just an appliance operator.
Bottom line, its now working.
**
Chuck
« Last Edit: October 14, 2013, 12:54:05 PM by w9nwrwi »
Computer:
CPU:i7-6700 4.0GHz, Ram:32GB,  Video.Card: GTX 1070 8Gb, OS:Win 10, 3ea 24" HDMI Widescreen.
X-Plane 11 RC1

Offline ananda

  • Explorer
  • ***
  • Posts: 67
    • View Profile
Re: .Net Framework update
« Reply #8 on: October 14, 2013, 12:50:03 PM »
There are a few vulnerabilities in .Net Framework reported by US-CERT today.

George

Offline tim arnot

  • Administrator
  • Master Navigator
  • *****
  • Posts: 5919
  • Country: england
    • View Profile
Re: .Net Framework update
« Reply #9 on: October 14, 2013, 01:47:07 PM »
It's certainly possible for the simconnect library to crash if you have an incorrect ip specified (unfortunately it's a black box and I have no way to get in there and fix it).

Tim. @TimArnot