Author Topic: P3D v2.5.12945 Compatibility  (Read 1597 times)

Offline nigfrench

  • Pathfinder
  • *
  • Posts: 7
    • View Profile
P3D v2.5.12945 Compatibility
« on: April 08, 2015, 03:21:22 PM »
Hi Gents,

Since I've upgraded to Prepar3d v2.5.12945 I've found that I get an APPCrash with the faulting error as MSVCR100.dll whenever the flight loads 100% but only if I run Plan-G at the same time as P3D is loading.

I never had this problem with v2.5.12944 and I use Razer Cortex as a loader. I have FSUIPC 4939j and Plan-G v3.1.2.101 installed, I'm just wondering if my version of Plan-G is compatible with the latest hotfix version of P3D.

Regards

Nigel

Offline tim arnot

  • Administrator
  • Master Navigator
  • *****
  • Posts: 5919
  • Country: england
    • View Profile
Re: P3D v2.5.12945 Compatibility
« Reply #1 on: April 08, 2015, 08:07:04 PM »
I don't use P3D, so maybe someone else can say if they've experienced similar trouble?

Tim. @TimArnot

Offline RCFlyer

  • Pathfinder
  • *
  • Posts: 16
    • View Profile
Re: P3D v2.5.12945 Compatibility
« Reply #2 on: April 09, 2015, 01:26:40 PM »
I use P3D V2.5 with the latest hotfix and PlanG, latest version, with no crash issues.  I start PG either before or after P3D is started.  I use FSUIPC as the data connection method.  The only issue I have with PG is that the traffic icons have multiple images, similar to leaving bread crums, when they move.

Hope this helps.

Regards,

Danny

Offline monirgeadah

  • Pathfinder
  • *
  • Posts: 6
    • View Profile
Re: P3D v2.5.12945 Compatibility
« Reply #3 on: April 12, 2015, 11:18:18 AM »
I use P3D V2.5 with the latest hotfix and PlanG, latest version, with no crash issues.  I use SimConect as the data connection method.  The only issue I have with PlanG is that it does not connect any more to my FSX by SimConnect ?? why . Where about is the Simconnect dll or the Simconnect XML in FSX ?. I have FSUIPC Unregistered, hence can not not use it to Connect to Plan G.

any advise would be greatly appreciated.

Thanks Tim for a very useful and great program.

Regards

Monir

My mediocre,6 years old, system specs are.
Intel Core 2 Quad Q9650 LGA 775 Yorkfield' 3.0 GHz 12 MB cache [1333 FSB] Processor.
Corsair 8GB DDR2 XMs2
Micosoft Windows 7 Home Premium edition 64 Bit -OEM
Nvidia graphic card 660 GTS 2GB.[the only update]

Offline tim arnot

  • Administrator
  • Master Navigator
  • *****
  • Posts: 5919
  • Country: england
    • View Profile
Re: P3D v2.5.12945 Compatibility
« Reply #4 on: April 13, 2015, 01:49:12 PM »
If you're connecting local, you shouldn't need a simconnect.xml, since the local port is open by default. Once you create the xml file, you'll need to add a local connection, since the xml will override default behaviour. Locations are in the manual, which I can't check cos I'm not at home.

Tim. @TimArnot

Offline monirgeadah

  • Pathfinder
  • *
  • Posts: 6
    • View Profile
Re: P3D v2.5.12945 Compatibility
« Reply #5 on: April 16, 2015, 11:27:19 AM »
Hi Tim.

Both my FSX and P3D are running on the same computer and on the default locations of the same main disc drive. the latest unregistered FSUIPC program installed a SimconnectP3D2 /DLL file 19 KB in P3D V2.5 /Modules folder. On the other hand FSUIPC did not manage to instal a Simconnect Dll file in FSX modules folder as it could not find a Simconnect XML.  ?? why.   For years I was able to connect to your program in fsx during our Visual Flights VFR Multiplayers jaunts and using the same FSX on the same computer.

I read the Plan G Manual  but still only able to connect to P3D on IPv4  /Localhost/Server port 0. But not to FSX

I am not IT Savy to be able to create a Simconect XML for my FSX.

Regards

Monir

Offline tim arnot

  • Administrator
  • Master Navigator
  • *****
  • Posts: 5919
  • Country: england
    • View Profile
Re: P3D v2.5.12945 Compatibility
« Reply #6 on: April 16, 2015, 11:53:07 AM »
FSUIPC unregistered is fine if you have Plan-G on the same PC (it's only when you start going networked that you need the registered version for WideClient & WideServer). Worth a try, anyway.

Tim. @TimArnot

Offline monirgeadah

  • Pathfinder
  • *
  • Posts: 6
    • View Profile
Re: P3D v2.5.12945 Compatibility
« Reply #7 on: April 17, 2015, 11:58:45 AM »
Apology to Nigel .I did not mean to hijack your thread. I am still puzzled as to why suddenly I am unable to connect to FSX?

Monir