Author Topic: Plan G stuck on preparing database for new data  (Read 1224 times)

Offline MattH2580

  • Pathfinder
  • *
  • Posts: 1
    • View Profile
Plan G stuck on preparing database for new data
« on: April 13, 2015, 09:20:11 PM »
Hi all,

Plan G is seemingly stuck on "Preparing database for new data" for my first run after install. It has taken almost an hour so far, and the log reads as follows for the past few cycles

21:38:32.1 DownloadCurrentMetars thread started
21:38:32.1 Metar19Z.TXT started
21:38:32.1 Metar20Z.TXT started
21:38:32.1 sTAF18Z.TXT started
21:38:32.1 sTAF12Z.TXT started
21:38:32.1 lTAF12Z.TXT started
21:38:32.1 lTAF18Z.TXT started
21:38:32.8 sTAF18Z.TXT done
21:38:32.9 sTAF12Z.TXT done
21:38:35.5 lTAF18Z.TXT done
21:38:35.6 lTAF12Z.TXT done
21:38:40.0 Metar19Z.TXT done
21:38:41.4 Metar20Z.TXT done
21:38:41.4 DownloadCurrentMetars done
21:38:42.1 ProcessMetars done
21:53:32.1 DownloadCurrentMetars thread started
21:53:32.1 Metar19Z.TXT started
21:53:32.1 lTAF12Z.TXT started
21:53:32.1 Metar20Z.TXT started
21:53:32.1 sTAF12Z.TXT started
21:53:32.1 sTAF18Z.TXT started
21:53:32.1 lTAF18Z.TXT started
21:53:32.7 sTAF12Z.TXT done
21:53:32.8 sTAF18Z.TXT done
21:53:35.1 lTAF18Z.TXT done
21:53:35.2 lTAF12Z.TXT done
21:53:36.9 Metar20Z.TXT done
21:53:38.1 Metar19Z.TXT done
21:53:38.1 DownloadCurrentMetars done
21:53:38.8 ProcessMetars done
22:08:32.1 DownloadCurrentMetars thread started
22:08:32.1 Metar20Z.TXT started
22:08:32.1 sTAF18Z.TXT started
22:08:32.1 Metar21Z.TXT started
22:08:32.1 lTAF12Z.TXT started
22:08:32.1 sTAF12Z.TXT started
22:08:32.1 lTAF18Z.TXT started
22:08:32.9 sTAF12Z.TXT done
22:08:33.3 sTAF18Z.TXT done
22:08:35.3 lTAF12Z.TXT done
22:08:36.1 Metar21Z.TXT done
22:08:36.1 lTAF18Z.TXT done
22:08:39.2 Metar20Z.TXT done
22:08:39.2 DownloadCurrentMetars done
22:08:39.8 ProcessMetars done

Any ideas?

Also, I really think there should be a minimize button for the database screen.

Offline tim arnot

  • Administrator
  • Master Navigator
  • *****
  • Posts: 5919
  • Country: england
    • View Profile
Re: Plan G stuck on preparing database for new data
« Reply #1 on: April 15, 2015, 09:17:14 PM »
Database load should take 5 minutes tops. If you look near the beginning of your log file. you'll probably find relevant entries, unfortunately the section you've included doesn't have any pertinent information. (basically nothing after the first few minutes will be useful)

Tim. @TimArnot